Search
Shopping Cart
Your cart is empty.
Browse Categories




SARCO QR CODE

Full Ensemble for the No. 32 MKI Telescope


MSRP: $750.00
Price: $595.00
You Save: $155.00 (21 %)
Currently Available
Item Number: N3207
FULL ENSEMBLE/ENFIELD #32 MK1 SNIPER SCOPE
Outstanding detailed steel reproduction telescope used on the Lee Enfield sniper rifle. Ruggedly built, it has drum adjustments w/ distinctive and solid clicking allowing for deflection of 16 minutes of angle left or right, as well as elevation settings at 2 minutes of angle each. Range drum allows adjustments at 50 yds per click out to 1000 yds. Complete set comes w/ steel case, adjustment tool, scope mount, cheek piece, lens covers ..... and as a bonus SARCO includes 2 bases, screws, taps and drill bits so you can install the mount.

COMPONENT PARTS AVAILABLE INDIVIDUALLY TOO!
1. #32 MK1 SCOPE by itself (SCP034)
2. Leather Lens Cover (SCP036) 
3. Front & Rear Base (Pads) (LE4071)
4. Drum Adjusting Tool (SCP037)
5. Transit Chest for scope (SCP035)
6. Full Set of Base Screws & Drills & Taps (LE4075)
7. Scope Mount (SCP001)

Note: ORIGINAL ENFIELD #32 SCOPES BRING UP TO $7,500. W/CHEST. HERE'S YOUR CHANCE TO BUILD AN AFFORDABLE ENFIELD SNIPER RIFLE!

Tell Us What You Think About This Product

(15 Ratings, 7 Reviews) Average Rating:
ratingratingratingratingrating
ratingratingratingratingrating
Very nice reproduction. Needs instructions
Brian Smith (Bowling Green, OH) 5/2/2016 8:31 AM
Faithful repro of original. I had to scour the internet however to find original dimensional drawings for mounting. After fixturing barreled receiver in the mill, I discovered the rear portion of the receiver had some hard spots where some of the holes go. I actually had to pilot the three rear holes through with carbide because the high speed tooling included wouldn't even touch it. I still haven't got the 1 #4 BA hole tapped because of this hardness issue. I have opted to tap the remaining hole #6-40 because I have a carbide tap available. The included tools are high quality, just not suitable if you run into hard spots like I did. It took me close to 4 hours to fixture, drill, & tap 5 holes because of the hard receiver. The mounting blocks also require a light striking with a file and stoning to get them flat. I wouldn't recommend taking on this project unless you've got a Bridgeport with a D.R.O. Definitely take your time tapping and frequently clear chips and you should be ok. Here's the link I found to dimensional drawings http://www.milsurps.com/content.php?r=312-Blueprints-and-Specifications-for-the-Enfield-No.4-Mk1(T)-Sniper-Rifle
ratingratingratingratingrating
Quality repoduction
Alfredo Martinez (Grand Forks, ND) 4/14/2015 9:45 PM
Overall this a nice package for building a No4 Mk1 (t) sniper rifle. Optics are clear, elevation and windage adjustment are at 2 minutes and positive. Scope adjustment tool included in the set is a time saver and a must. Instructions are not included for using the scope adjustment tool or for mounting the scope pads. Be nice if a cheek pad could be included at the same price. I would buy another kit.
ratingratingratingratingrating
Quality repoduction
Alfredo Martinez (Grand Forks, ND) 4/14/2015 9:44 PM
Overall this a nice package for building a No4 Mk1 (t) sniper rifle. Optics are clear, elevation and windage adjustment are at 2 minutes and positive. Scope adjustment tool included in the set is a time saver and a must. Instructions are not included for using the scope adjustment tool or for mounting the scope pads. Be nice if a cheek pad could be included at the same price. I would buy another kit.
ratingratingratingratingrating
Nice scope kit
Alfredo Martinez (Grand Forks, ND) 3/13/2015 4:37 PM
Nice kit, came well packaged. No instructions on how to mount the pads or adjust the scope. Only complaint I have, is that one screw on the ID plate was stripped out. tried to call SARCO and when transferred I get an answering machine. Over all happy with the kit.
ratingratingratingratingrating
Nice Scope, well made
howard roberts (cypress , TX) 1/31/2015 4:16 PM
Only problem I had was the carry case was damaged, some work had to be done on the scope adapter pad thread, test fired and had no problem sighting in at 100 yards, 3 to 4 inch group, still need to do some adjusting, all in all I like the scope and suggest that SARCO start checking the packages for damage, easy to install as all tools needed are in the kit.
Mailing Lists
Vote for us as your favorite
Firearms Store! Click the link
below and select the "Firearms"
category to cast your vote!